Prevista Dry Plus
Assortment
General
Flexible pre-wall installation system for dry construction (lightweight construction wall). Barrier-free and handicapped accessible mounting is possible. With mounting rail, rail connector, pre-wall elements and ready-to-install sanitary object modules and fitting holders. For half height and room height pre-wall constructions, as well as free-standing constructions. consisting of: mounting rail, with large installation face for cladding and direct fixing to floors, ceilings and walls, rail connector for 45° and 90° connections and rail punch for cutting the mounting rail to length precisely and without burr
Pre-wall elements for:
WC, bidet, washbasin, urinal, fitting holder
-
Show more
Cladding with:
Fibre-glass reinforced, core impregnated plasterboard cladding panels with a thickness of 18 mm.
Plasterboard cladding panels for extremely wet areas, commercially available cladding panels.
Calculation of material required:
The required rail length can be calculated from the pre-wall area (width by height) in m² with the rail factor.
surface (m²) x rail factor = required rail length (m)
rail factor 4.5 forPrevista Dry installation elements
rail factor 5.5 forPrevista Dry Plus installation modules
The rail factor is no substitute for detailed planning.
Note
Use of the system for areas of application and media other than those described must be agreed in consultation with Viega! Load: WC and bidet 400 kg, washbasin and urinal 150 kg, support handles and hand grips 100 kg! Fulfils the general requirements for fire safety and sound protection. Detailed information on fire safety and sound protection can be obtained from the Viega website or from your contact at Viega.
Web application for simple, quick calculation and visualisation of the appropriate flush plate for the bathroom design.
Subject to change without prior notice!
Latest Z- and installation dimensions as well as further technical information can be found on the Viega website and have to be checked before purchase, planning, construction work and use. Our products are continuously optimised.
This product description contains important information on choice of product and system, mounting, commissioning as well as intended use and, if required, on maintenance measures. This information on products, their features and application techniques is based on currently valid standards in Europe (e.g. EN) and/or in Germany (e.g. DIN/DVGW). Some passages in the text may refer to technical regulations in Europe/Germany. These should be considered as recommendations for other countries where no corresponding national requirements exist. The relevant national laws, standards, regulations, directives and other technical provisions take priority over the German/European directives specified in this product description: The information herein is not binding for other countries and regions and should be understood as recommendation.
Certificates
Downloads
0 Results
