Safety clamp
Safety clamp
- for securing of screw fitting against unauthorised persons, union nut of gas meter union in accordance with DIN 3376, single-pipe gas pressure regulator or brass screw fitting
Components
stainless steel clamps, galvanised steel screws and cap nutswith DVGW-G-test mark
Model G2371.2
Article
MS | DN | for G | ID A | ID B | PO C | PO D | PU | Article | amount |
---|---|---|---|---|---|---|---|---|---|
MS | DN | for G | ID A | ID B | PO C | PO D | PU | Article | amount |
G4 | 20 | 1 | 52 | 22 | 30 | 34 | 1 | 533 076 1)2) |
|
G4–6 | 25 | 1¼ | 57 | 22 | 38 | 44 | 1 | 533 083 2)3)4) |
|
G6–10 | 32 | 1¾ | 67 | 23 | 48 | 55 | 1 | 533 090 4) |
|
G10–16 | 25/40 | 2 | 75 | 25 | 54 | 61 | 1 | 533 106 5) |
|
G25 | 50 | 2½ | 92 | 26 | 69 | 76 | 1 | 533 113 |
|
MS = gas meter size
ID A = internal dimension A
ID B = internal dimension B
PO C = pipe opening C
PO D = pipe opening D
1) for nominal width DN15, union nut G⅞ and pipe opening D approx. Ø 30 mm
2) for union nut of controller or pipe screw fitting in accordance with DIN EN 10242 (annealed cast iron)
3) for nominal width DN20, union nut G1⅛ and pipe opening D approx. Ø 38 mm
4) for union nut of gas ball valve and single-pipe gas meter
5) DN25=single-pipe gas meter size G2.5‑6
CAD files
- Left mouse to rotate
- Right mouse to move
- Mouse wheel to zoom
- One finger touch to rotate
- Two finger touch to move
- Pinch to zoom
(Please choose)
MS = gas meter size
ID A = internal dimension A
ID B = internal dimension B
PO C = pipe opening C
PO D = pipe opening D
Downloads
0 Results